DIY Upgrade- Adding Variable Speed Intermittent Wiper function
Ever since the Grand Vitara/2022 Brezza came out, noticed the stalk which matched the shape/profile of the stalks on XL6. Curiously, checked their PIN diagrams and it was identical.
Maruti OEM Part Number: 37310M68P21
Installation was a simple affair.
1. Remove one screw and pull the lower part of dashboard trim, comes out cleanly.
2. There will be one screw holding the lower part of steering column cover, unscrew it and remove the lower part.
3. Turn the steering wheel to left and right and unscrew the two screws visible and remove the top part of the column cover.
4. Undo the tab to release the stalk and also the coupler.
5. Installation is simply a reverse process and you are done.
Cons: The only single demerit is that the new stalk has REAR INT function, but the wiring of XL6 or other models on Heartect doesn't support it. Anyways we didn't have this function earlier, so no harm done.
Supported and Verified Models: Request you all to go through the list mentioned carefully before attempting this mod.
Variable Intermittent Wiper mod in action on Maruti XL6 Alpha MT
Variable Intermittent Wiper mod in action on Maruti Baleno Zeta MT